Display Characteristics; Package Components; Configuration - Nortel 1110 Fundamentals

•

Display characteristics

The Expansion Module has the following display characteristics
•
•
•

Package components

Table 59 "Expansion Module components list" (page 433)
Expansion Module package components.
Table 59
Expansion Module components list
Expansion Module for IP Phone 1100 Series
Configuration
Use LD 11 to configure the Expansion Module.
LD 11 - Configure the Expansion Module
Prompt Response
REQ: NEW/CHG
TYPE 1120/1140/1150
... ...
KEM (0) - 3/<CR>
... ...
Copyright © 2003–2007, Nortel Networks
.
IP Phone and Expansion Module combination can be wall-mounted
using the wall mount template provided.
LCD display area—Each of the 18 physical keys on the Expansion
Module has a 10-character display label beside the 18 self-labeled
line/programmable feature keys (see
Expansion Module for IP Phone 1100 Series" (page
set automatically; however, the user can edit the label using the controls
on the IP Phone.
adjustable display and contrast settings—Use the Contrast Adjustment
option in the Telephone Options menu on the IP Phone to adjust the
display and contrast settings. Any contrast changes you make on the
IP Phone affect the Expansion Module. The Expansion Module and IP
Phone do not have separate contrast adjustments.
backlight—The local 48 V power supply is required to operate the
backlight on the Expansion Module; however, you can use either the
local 48 V power supply or Power over Ethernet (PoE) to operate all
other Expansion Module functionality.
Description
Add new or change existing data.
For IP Phone 1120E, IP Phone 1140E, and IP Phone
1150E
...
Number of attached Expansion Modules (0). Up to three
Expansion Modules are supported.
...
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Figure 50 "IP Phone 1140E with
NTYS08AAE6
Configuration 433
432)). This label is
lists the