Removing An Ip Phone 2004 From Service; Procedure 16 - Nortel 1110 Installation And Operation Manual

Removing an IP Phone 2004 from service

4 Enter the same TN and Node Number as the IP Phone 2004 you
replaced. The Call Server associates the new IP Phone 2004 with the
existing TN.

Procedure 16

Removing an IP Phone 2004 from service

1 Disconnect the IP Phone 2004 from the network or turn the power off.
Note: The service to the PC is disconnected as well if the PC is
connected to the IP Phone 2004.
If the IP Phone 2004 was automatically configured, the DHCP lease
expires and the IP address returns to the available pool.
2 In LD 11, enter OUT at the TN prompt.
Nortel IP Phone 2004
End of Procedure
End of Procedure
IP Phones Description, Installation, and Operation
Page 111 of 630