Tftp Firmware Upgrade - Nortel 1110 Fundamentals

7
8
When the IP Phone restarts, the firmware reads the setting for Full Duplex
mode and sets the LAN Ethernet port, PC Ethernet port, duplex, and speed
accordingly.
Use
activation of Full Duplex mode.
Procedure 76
Checking Ethernet Statistics
Step
1
2
TFTP firmware upgrade
When you enter Cfg TFTP = 1 (for yes), and enter an IP address, the IP
Phone searches for an upgrade file on the TFTP Server.
Users of CS 1000 Release 4.5, or later do not need to enter a TFTP IP
address.
Copyright © 2003–2007, Nortel Networks
.
Press Enter to exit the edit mode.
Press the Apply&Reset soft key to save the changes and to restart
the IP Phone 1140E. The firmware settings are read and are applied
to UPLINK and the PC Ethernet Port.
Procedure 76 "Checking Ethernet Statistics" (page 385)
Action
Double-press the Services key to open the Local Tools menu.
Press 2 to select Local Diagnostics, then press 3 to open the
Ethernet Statistics menu.
If Full Duplex mode is active, the following is displayed
• Link Status: UP
•
Duplex Mode: Full
• Network Speed: 10 MB, 100 MB, or 1 G
• Auto Sense/Negotiate
— Auto-Negotiate Capability: No
— Auto-Negotiate Completed: No
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
TFTP firmware upgrade
—End—
—End—
385
to confirm