Nortel 1110 Fundamentals page 187

10
11
12
13
14
15
Copyright © 2003–2007, Nortel Networks
.
•
Partial—IP network information (IP address, network mask, and
gateway address) are provided by the DHCP server. Enter
Server 1 IP address, Server 2 IP address, Port, Action, Retry,
and PK numbers manually.
• Full—IP network information, Server 1 IP address, Server 2 IP
address, and XAS information are provided by the DHCP server.
All items are dimmed to prevent manual entry.
A DHCP server and DHCP relay agents must also be installed,
configured, and running if you choose Partial DHCP, or Full DHCP
configuration.
For more information about how to set up DHCP servers for use
with the IP Phones, see Converging the Data Network with VoIP
Fundamentals (NN43001-260).
Use the Right navigation key to scroll and highlight Set IP. Use the
dialpad to fill in the information:
Set IP—a valid IP Phone 2007 IP address
Use the Right navigation key to scroll and highlight NET MASK. Use
the dialpad to fill in the information:
Network Mask—a subnet mask
Use the Right navigation key to scroll and highlight Gateway. Use
the dialpad to fill in the information:
Gateway—the default gateway for the IP Phone 2007 on the LAN
segment to which it connects
Use the Right navigation key to scroll and highlight S1 IP. Use the
dialpad to fill in the information:
S1 IP—the primary CS 1000 node IP address for IP Phone 2007
Use the Right navigation key to scroll and highlight Port. Use the
dialpad to fill in the information:
S1 Port—a fixed value of 4100
Use the Right navigation key to scroll and highlight S1 Action. Use
the dialpad to fill in the information. Choose one of the following:
• for TPS only, enter 1
• for TPS and Secure Multimedia Controller, enter 6 or 1
For more information about Secure Multimedia Controller, see
Secure Multimedia Controller Implementation Guide (NN43001-325).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Installation and configuration 187