Description - Nortel 1110 Fundamentals

278 Nortel IP Phone 1110
This section contains the following procedures
Procedure 57 "Configuring the IP Phone 1110 " (page 290)
Procedure 58 "Installing the IP Phone 1110 for the first time using manual
configuration" (page 297)
Procedure 59 "Installing an IP Phone 1110 for the first time using DHCP"
(page 304)
Procedure 60 "Enabling Full Duplex mode" (page 312)
Procedure 62 "Changing the TN of an existing IP Phone 1110" (page 314)
Procedure 63 "Replacing an IP Phone 1110" (page 315)
Procedure 64 "Removing an IP Phone 1110 from service" (page 316)

Description

The IP Phone 1110 uses the customer IP data network to communicate with
the Communication Server 1000 (CS 1000) . The IP Phone 1110 translates
voice into data packets for transport using Internet Protocol. Use a Dynamic
Host Configuration Protocol (DHCP) server to provide information that you
can use for the IP Phone 1110 network and CS 1000 connections.
Figure 25 "IP Phone 1110" (page 279)
Copyright © 2003–2007, Nortel Networks
.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
shows the IP Phone 1110.