Description - Nortel 1110 Fundamentals

96 Nortel IP Phone 2004
•
•
•
•
•
After you install and configure an IP Phone, if power to the phone is
interrupted, you need not re-enter the IP parameters, node number,
Terminal Number (TN), or reacquisition of firmware.

Description

The IP Phone 2004 uses the customer IP data network to communicate with
the Communication Server 1000 (CS 1000). The IP Phone 2004 translates
voice into data packets for transport using Internet Protocol. Use a Dynamic
Host Configuration Protocol (DHCP) server to provide information that you
can use for the IP Phone 2004 network and CS 1000 connections.
Figure 7 "IP Phone 2004" (page 96)
Figure 7
IP Phone 2004
Copyright © 2003–2007, Nortel Networks
.
Procedure 20 "Enabling Full Duplex mode" (page
Procedure 21 "Checking Ethernet Statistics" (page
Procedure 22 "Changing the TN of an existing IP Phone 2004" (page
128).
Procedure 23 "Replacing an IP Phone 2004" (page
Procedure 24 "Removing an IP Phone 2004 from service" (page
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
127).
127).
129).
shows the IP Phone 2004.
130).