Ip Phones Fundamentals; Nn43001-368 02.01 Standard - Nortel 1110 Fundamentals

552 Appendix I TFTP Server
Automatic TFTP download at bootup
If a TFTP IP address has been configured and a firmware upgrade is
available on the server when the phone restarts, the phone executes the
automatic TFTP download. This method requires the TFTP Server to store
the .cfg and 0625Cxx.bin files for the IP Phone in the root directory.
For example, the IP Phone 1110, IP Phone 1120E, IP Phone 1140E, and IP
Phone 1150E require the following files:
•
•
•
•
Table 75 "Fields in the TFTP configuration file" (page 552)
the fields in the configuration file on the TFTP Server. The download
mode can be set to AUTO or FORCED. It is recommended that you set
DOWNLOAD_MODE to AUTO.
Table 75
Fields in the TFTP configuration file
Field Name
[FW]
DOWNLOAD_MODE
VERSION
FILENAME
PROTOCOL
Copyright © 2003–2007, Nortel Networks
.
1110.cfg
0625Cxx.bin
1120e.cfg
0625Cxx.bin
1140e.cfg
0625Cxx.bin
1150e.cfg
0625Cxx.bin
0625Cxx.bin is the name of the firmware file by default, but the
location and the name of the firmware image file being downloaded
is specified in .cfg and can be any name. The name of the firmware
image file can be specified in relative path name notation (for example,
/subfolder/name.ext or name.ext).
Field Value
AUTO
FORCED
0625Cxx
0625Cxx.bin
TFTP
Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.01 Standard

Release 5.0 7 December 2007
Descriptions
Section header for firmware download info
Recommended setting. The application looks at
the version and downloads the FW if it is a newer
version than what is on the phone.
The version of firmware is ignored. The firmware
is always downloaded.
The version string compared to what is on the
phone.
Image file name. Must match the file name of the
actual IP Phone FW file.
Download protocol. Must be TFTP.
describes