Nortel 1110 Fundamentals page 378

378 Nortel IP Phone 1140E
18
19
20
21
22
23
Copyright © 2003–2007, Nortel Networks
.
Use the Right navigation key to scroll and highlight S2 IP. Press
the Enter key to start the edit mode. Use the dialpad to fill in the
information:
S2 IP—the secondary CS 1000 node IP address for the IP Phone
1140E
The IP Phone 1140E can support a primary (S1) and secondary
(S1) connect server. If you require IP Phones to register on multiple
nodes, see IP Line Fundamentals (NN43100-500).
Use the Right navigation key to scroll and highlight Port. Press
the Enter key to start the edit mode. Use the dialpad to fill in the
information:
Port—same as S1 port
Use the Right navigation key to scroll and highlight S2 Action.
Press the Enter key to start the edit mode. Use the dialpad to fill in
the information. Choose one of the following
• for TPS only, enter 1
• for TPS and Secure Multimedia Controller, enter 6 or 1
For more information about Secure Multimedia Controller, see
Secure Multimedia Controller Implementation Guide (NN43001-325).
Use the Right navigation key to scroll and highlight Retry. Press
the Enter key to start the edit mode. Use the dialpad to fill in the
information:
Retry—same as S1
Use the Right navigation key to scroll and highlight S2 PK.
S2 PK—the Private key of the alternate Secure Multimedia Controller
to which the IP Phone connects.
Press the Enter key to start the edit mode.
To manually configure the PK, set DHCP to Partial or None.
S2 PK Default is ffffffffffffffff.
If you use a Secure Multimedia Controller, enter a 16-digit
hexadecimal number.
To enter ALPHA digits, use a USB keyboard to enter the following:
# 1 = A
# 2 = B
# 3 = C
# 4 = D
# 5 = E
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007