Tftp Firmware Upgrade; Nortel Communication Server - Nortel 1110 Fundamentals

When the IP Phone restarts, the firmware reads the setting for Full Duplex
mode and sets the LAN Ethernet port, PC Ethernet port, duplex, and speed
accordingly.
Use
activation of Full Duplex mode.
Procedure 61
Checking Ethernet Statistics
Step
1
2
TFTP firmware upgrade
When you enter Cfg TFTP = 1 (for yes), and enter an IP address, the IP
Phone searches for an upgrade file on the TFTP Server.
Users of CS 1000 Release 4.5, or later do not need to enter a TFTP IP
address.
For further information about TFTP firmware upgrade, see
Server" (page
Copyright © 2003–2007, Nortel Networks
.
Procedure 61 "Checking Ethernet Statistics" (page 313)
Action
Double-press the Services key.
Press 2 to select Local Diagnostics, then press 3 to open the
Ethernet Statistics menu.
If Full Duplex mode is active, the following is displayed
• Link Status: UP
•
Duplex Mode: Full
• Network Speed: 10 Mb or 100 Mb
• Auto Sense/Negotiate
— Auto-Negotiate Capability: No
— Auto-Negotiate Completed: No
547).

Nortel Communication Server 1000

IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
TFTP firmware upgrade
—End—
—End—
313
to confirm
Appendix "TFTP