Key Number Assignments; Self-Labeled Line/Programmable Feature Keys; Acd Fixed Feature Keys; Soft Keys - Nortel 1110 Fundamentals

attempts is ignored for 5 minutes. The password prompt window is visible
and you can reenter the password but the password is not processed until
the 5-minute time expires.
Some text appears dimmed depending on the current state of the menu lock
and the configuration of the IP Phone. Only configuration options that are
enabled from the current state appear active. Menu options that are not
available appear dimmed.
For more information about configuring the Local Tools menu for the IP
Phone 1150E, see

Key number assignments

This section describes the following keys supported on the IP Phone 1150E
•
•
•

Self-labeled line/programmable feature keys

The IP Phone 1150E has six self-labeled line/programmable feature keys,
which can support up to 12 DNs or features on two pages. When a call is
presented on a feature key which is not currently shown, the message Shift
for Call appears in the display area. Press the Shift/Outbox key to access
the second page of a feature or DNs, or to access any Expansion Module
1100s attached to the phone.
The six self-labeled line/programmable feature keys are numbered 0-5 for
the first key page, and 6 to 11 for the second key page.
When key 0 is programmed as the ACD In-Calls key, the default features are
assigned to the Automatic Call Distribution (ACD) fixed keys.
ACD fixed feature keys
Key numbers 12 to 15 are used for the ACD fixed features. See
"ACD default Agent fixed feature keys" (page 406)
default Agent fixed feature keys or
(page 406)
For a description of supported call features, see
(page
Copyright © 2003–2007, Nortel Networks
.
Appendix "Configuring the Local Tools menu" (page
"Self-labeled line/programmable feature keys" (page 405)
"ACD fixed feature keys" (page 405)
"Soft keys" (page 406)
for a list of Supervisor fixed feature keys.
563).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Key number assignments 405
for a list of the ACD
Table 56 "Supervisor fixed feature keys"
Appendix "Call features"
473).
Table 55