Nortel 1110 Fundamentals page 293

5
Copyright © 2003–2007, Nortel Networks
.
Figure 29
IP Phone 1110 connections
Install the handset. Connect the end of the handset cable with the
short straight section into the handset. Connect the end of the
handset cable with the long straight section to the back of the phone,
using the RJ-9 handset jack. Form a small bend in the cable, and
then thread the handset cord through the channels in the stand so
that it exits behind the handset on the right side, in the channel exit
in the stand base. See
Although a headset cord channel appears on the base of the IP
Phone 1110, the IP Phone 1110 does not support a headset port.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Installation and configuration 293
Figure 30 "Cable routing tracks" (page 294).