Nortel 1110 Fundamentals page 534

534 Appendix G Bluetooth wireless technology
Procedure 129
Enabling Bluetooth wireless technology on the IP Phone 1140E
Step
If the TFTP server is configured and running, skip to
Phone 1140E with the TFTP Server IP address.
1
2
3
Copyright © 2003–2007, Nortel Networks
.
Action
Add the [DEVICE_CONFIG] section to the 1140e.cfg file.
Create the device configuration file. This file must have the
same name as that specified for the FILENAME parameter in the
[DEVICE_CONFIG] section of the 1140e.cfg file. See
"Sample of the 1140eDEV.cfg file" (page
Figure 74
Sample of the 1140eDEV.cfg file
The device configuration file (1140eDEV.cfg) enables Bluetooth
wireless technology if ENABLE_BT 1 is present. If ENABLE_BT 0
is present, Bluetooth wireless technology is disabled.
"Sample of the 1140E.cfg file" (page 535)
1140e.cfg file with the FW and the ENABLE_BT line.
It is also possible to use the 1140e.cfg file with only the
[DEVICE_CONFIG] section for the control of Bluetooth wireless
technology. Figure 76 "Sample of the DEVICE_CONFIG file with
only the [DEVICE_CONFIG] section" (page 535)
of the 1140e.cfg file with only the [DEVICE_CONFIG] section.
If only the [DEVICE_CONFIG] version is used, you must add the
[FW] section before the BootC FW recovery is used. Otherwise, the
BootC FW download fails and the IP Phone reverts to the BootC
TPS download screen.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
ATTENTION
step 5
534).
shows an example of the
to configure the IP
Figure 74
Figure 75
shows an example