Description - Nortel 1110 Fundamentals

132 Nortel IP Audio Conference Phone 2033
•
•
•
•
•
•
•
After you install and configure an IP Phone, if power to the phone is
interrupted, you need not re-enter the IP parameters, node number,
Terminal Number (TN), or reacquisition of firmware.

Description

The IP Audio Conference Phone 2033 uses the customer IP data network
to communicate with the Communication Server 1000 (CS 1000). The
IP Audio Conference Phone 2033 translates voice into data packets for
transport using Internet Protocol. Use a Dynamic Host Configuration
Protocol (DHCP) server to provide information that you can use for the IP
Audio Conference Phone 2033 network and CS 1000 connections.
Figure 10 "IP Audio Conference Phone 2033" (page 133)
Audio Conference Phone 2033.
Copyright © 2003–2007, Nortel Networks
.
Procedure 26 "Installing the IP Audio Conference Phone 2033 for the
first time using manual configuration" (page 148)
Procedure 27 "Installing an IP Audio Conference Phone 2033 for the
first time using DHCP" (page 154)
Procedure 28 "Enable Full Duplex mode" (page 161)
Procedure 29 "Checking Ethernet Statistics" (page 161)
Procedure 30 "Changing the TN of an existing IP Audio Conference
Phone 2033" (page 162)
Procedure 31 "Replacing an IP Audio Conference Phone 2033" (page
163)
Procedure 32 "Removing an IP Audio Conference Phone 2033 from
service" (page 164)
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
shows the IP