Nortel 1110 Fundamentals page 50

50 Nortel IP Phone 2001
8
Copyright © 2003–2007, Nortel Networks
.
Screen prompt
S2 retry count
S2 PK
Cfg XAS?
(0-No,1-Yes)
XAS IP:
Speed (0-A, 1-10, 2-100)
Duplex (0-A, 1-F, 2-H)
Enter the following parameters:
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Description
Same as S1.
To manually configure the PK, set the Action
Byte to 6. After you enter the PK, apply the
changes and then change the Action Byte
to 1, if required.
Default is ffffffffffffffff.
The Private key of the alternate Secure
Multimedia Controller to which the IP Phone
connects.
If you use a Secure Multimedia Controller,
enter a 16-digit hexadecimal number.
To enter ALPHA digits from A to F, enter the
following:
#1 = A
#2 = B
#3 = C
#4 = D
#5 = E
#6 = F
Default 0 (for No).
If no External Application Server (XAS)
is present, enter 0 (for No). You are not
prompted to enter the XAS IP address.
Enter the IP address of the XAS server.
Network interface port speed.
Default 0 (for Auto)
0 = Auto
1 = 10 BT
2 = 100 BT
You are not prompted for Speed if PC Port
is set to 0 for off.
Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for Duplex if PC Port is
set to 0 for off or if Speed is set to 0 for Auto.