Nortel 1110 Fundamentals page 186

186 Nortel IP Phone 2007
Procedure 35
Installing the IP Phone 2007
Step
1
2
3
4
5
6
7
8
9
Copyright © 2003–2007, Nortel Networks
.
Action
Use the Right navigation key to scroll and highlight the Enable
802.1x Auth. (EAP): list box.
Press the Down navigation key to open list box.
Use the Up/Down navigation keys to scroll and highlight Yes to
enable 802.1x Authentication, or No to disable 802.1x Authentication.
If 802.1x Authentication is enabled, use the dialpad to fill in the
following information:
• Device ID
•
Password
• Retype the password
Use the dialpad to enter digits only. To enter alpha characters, use
either the IP Phone 2007 pop-up keyboard, or a USB keyboard.
For further information about EAP, see
network access control" (page
If you do not enable 802.1x Authentication, you are not prompted to
enter Device ID and Password.
Use the Right navigation key to scroll and highlight Enable 802.1x
(LLDP Enable).
For more information about LLDP, see
Discovery Protocol" (page
Use the Up/Down navigation keys to scroll and highlight Yes to
enable LLDP, or No to disable LLDP.
LLDP is one means in which 801.2 can be automatically provisioned.
For more information about 802.1Q, see
description" (page 461).
Use the Right navigation key to scroll and highlight DHCP list.
Press the Down navigation key to open list box.
Use the Up/Down navigation keys to scroll and highlight one of the
following DHCP options:
• No—disable DHCP support and enter IP network information
manually.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Appendix "802.1x Port-based
469).
Appendix "802.1ab Link Layer
471).
Appendix "802.1Q VLAN