Getting started The BCM Nortel Networks IP Phone 2004 brings voice and data to your desktop. Introduction This guide contains information about: • telephone buttons and lights • telephone display • telephone setup • how to make and answer calls •...
Getting started IP Phone 2004 button and light descriptions Figure 2 shows the IP Phone 2004 lights and buttons. Figure 2 IP Phone 2004 buttons Table 1 shows a description of the lights and buttons. Table 1 IP Phone 2004 buttons and descriptions...
Page 5
Default Services button (programmable memory button #10) Default access to scrollable feature display menu, including the hot desking feature. Programmable memory button #11 (Default: Blank) Programmable memory button #12 (Default: Blank) PC Expansion button Getting started “Program IP Phone 2004 User Guide...
Getting started IP Phone 2004 display There are three areas to the IP Phone 2004 display: • Button label area • Information area • Feature options area Figure 3 shows an example of the display and describes each area. Figure 3 Display area...
Your System Administrator assigns the six programmable buttons as line, intercom or memory buttons. The label for each button appears on the display next to the button. For more information, see your System Administrator. Telephone setup This section describes the IP Phone 2004 display features: • Display contrast •...
Getting started Ring type Select a different ring type for your telephone. Feature Press Press 1, 2, 3, 4, or Press to store the ring type. N0027284 01 NEXT or to hear the different ring types.
Features and buttons This section describes some of the IP Phone 2004 buttons and call features: • Basic call features • Navigation buttons • Memory buttons Note: For more information about the features available to your telephone and how to use them, refer to the Telephone Feature Card.
Features and buttons Internal calls using intercom buttons Lift the handset. Press an intercom button. Dial the extension number. Note: Contact your System Administrator for a list of extension numbers. Answer calls When your telephone rings and the light flashes or an intercom or line button “ indicator flashes: •...
Handsfree or headset calls. Time offset When your IP Phone 2004 is located in a different time zone from your system, the display shows the system time not the local time. The Time Offset feature allows you to adjust the time that appears on the display.
Lift the handset. Memory buttons This section contains information about the IP Phone 2004 memory buttons and how to use them. These are buttons not assigned as line or intercom buttons. Memory buttons store internal and external numbers or features to give you one touch dialing or feature activation. Refer to Phone 2004 button and light descriptions”...
Press a memory button. Press Feature and enter the feature code. Press OK to store the feature code. Erase memory buttons Press Feature *1. Press a memory button. Press OK to erase the button. Features and buttons IP Phone 2004 User Guide...