Nortel 1110 Fundamentals page 411

4
Copyright © 2003–2007, Nortel Networks
.
Figure 47
Remove the stand cover
Connect the AC power adapter (optional). Leave the AC adapter
unplugged from the power outlet, connect the adapter to the AC
adapter jack in the bottom of the phone. Form a small bend in the
cable, and then thread the adapter cord through the channels in
the stand.
WARNING
Use your IP Phone 1150E with the approved Nortel global
power supply (model number N0089601).
The IP Phone 1150E supports both AC power and Power over
Ethernet options, including IEEE 802.3af Power Classification 3.
To use Power over Ethernet, where power is delivered over the
CAT5 cable, the LAN must support Power over Ethernet, and an
AC adapter is not required. To use local AC power, the optional AC
adapter can be ordered separately.
You must use CAT5e (or later) cables if you want to use Gigabit
Ethernet.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Installation and configuration 411