Startup Sequence; Installing The Ip Phone 2002 - Nortel 1110 Fundamentals

74 Nortel IP Phone 2002

Startup sequence

When an IP Phone 2002 connects to the network, it must perform a startup
sequence. The elements of the startup sequence include:
•
•
•
•
See
IP parameters and how they are obtained.
Table 8
IP Phone 2002 IP parameters
Parameter
VLAN ID
IP Address
Net Mask
Default Gateway Address
Connect Server (IP address, port,
action and retry count—primary and
secondary)
User ID (Node ID, Node Password and
TN)

Installing the IP Phone 2002

To install the IP Phone 2002 for the first time using manual configuration,
use
manual configuration" (page
time using DHCP, see
first time using DHCP" (page
Copyright © 2003–2007, Nortel Networks
.
"Installing an IP Phone 2002 for the first time using DHCP" (page
82) to install the IP Phone 2002 for the first time using DHCP.
obtaining VLAN ID (if supported by the network infrastructure)
obtaining the IP parameters
connecting to the Call Server
obtaining a User ID
Table 8 "IP Phone 2002 IP parameters" (page 74)
Method of Acquisition
Manually entered or automatically obtained through DHCP,
and LLDP.
Manually entered or automatically retrieved through Partial
or Full DHCP.
Manually entered or automatically retrieved through Partial
or Full DHCP.
Manually entered or automatically retrieved through Partial
or Full DHCP.
Manually entered or automatically retrieved through Full
DHCP.
Manually entered for first-time configuration. Retrieved
from local storage on subsequent power cycles.
Procedure 10 "Installing the IP Phone 2002 for the first time using
Procedure 11 "Installing an IP Phone 2002 for the
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
—End—
75). To install the IP Phone 2002 for the first
82).
for a summary of the