Nortel 1110 Fundamentals page 116

116 Nortel IP Phone 2004
Copyright © 2003–2007, Nortel Networks
.
Screen prompt
Data VLAN Cfg? (0-Auto, 1-Man)
Data VLAN ID:
Data pBits (0-7, 8-Au)
PCUntagAll? (0-N, 1-Y)
PSK SRTP? (0-No, 1-Yes)
GARP Ignore? (0-No,1-Yes)
The IP Phone 2004 supports remote firmware upgrades through a
TFTP process and an automated UFTP process.
You are prompted to enter the TFTP Server IP address if you are
using a TFTP Server to download the current firmware.
The method to upgrade the firmware depends on the following Call
Server software:
• For Succession Release 3.0 or CS 1000 Release 4.0, the TFTP
Server is required to download the current firmware. Enter the
TFTP Server IP address at the prompt
• For CS 1000 Release 4.5, use either a TFTP Server to upgrade
the firmware (at the prompt accept the default entry of 0.0.0.0) or
UFTP to download the current firmware.
• For CS 1000 Release 5.0, a Signaling Server provides the
firmware for the IP Phones. Check the Nortel Web site at
www.nortel.com
For Succession Release 3.0 and CS 1000 Release 4.0, the IP Phone
2004 searches for the TFTP Server for firmware upgrade. If the file
name specified in i2004.cfg is not the same as the current firmware,
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Description
Default 1 (for Man).
You are not prompted for Data
VLAN Cfg if LLDP or Data VLAN
are not enabled and PC Port is set
to 0 for Off.
If you select 0 (for Auto), VLAN ID
is automatically configured to the
value received in the VLAN NAME
TLV.
You are not prompted for Data
VLAN ID if Data VLAN is set to 0
for Auto.
Default 8 (for Au).
You are not prompted for Data
pBits if the PC Port is set to 0 for
Off or if 802.1Q is not enabled.
Default 0 (for No).
Default 0 (for No).
Default 0 (for No).
for updated firmware files.