Nortel 1110 Fundamentals page 298

298 Nortel IP Phone 1110
6
7
Copyright © 2003–2007, Nortel Networks
.
•
Full DHCP— (default) all parameters are obtained from the
DHCP server
A DHCP server and DHCP relay agents must also be installed,
configured, and running if you choose Partial DHCP, or Full DHCP
configuration. For more information about how to set up DHCP
servers for use with the IP Phones, see Converging the Data
Network with VoIP Fundamentals (NN43001-260).
Enter the following information.
Screen prompt
set IP
net msk
def gw
Enter the information for the primary Connect Server (S1) and the
secondary Connect Server (S2).
Screen prompt
S1 IP
S1 Port
S1 action
S1 retry count
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Description
a valid IP Phone 1110 IP address.
a subnet mask.
the default Gateway for the IP Phone 1110 on
the LAN segment to which it connects.
Description
The primary CS 1000 node IP
address for the IP Phone 1110.
This is a fixed value: 4100.
Choose one of the following:
• for TPS only, enter 1.
• for TPS and Secure Multimedia
Controller, enter 6 or 1.
For more information about
Secure Multimedia Controller,
see Secure Multimedia
Controller Implementation Guide
(NN43001-325).
You are not prompted for S1 PK if
S1 Action is set to 1.
The number of times the IP Phone
1110 attempts to connect to the
server. Enter 10.