Phone - Nortel 1110 Fundamentals

294 Nortel IP Phone 1110
6
7
Copyright © 2003–2007, Nortel Networks
.
Figure 30
Cable routing tracks
Install the Ethernet cable. Connect one end of the supplied Ethernet
cable to the back of your phone using the CAT5 cable (not provided),
and thread the network cable through the channel.
If you are connecting your PC through the phone a second CAT5
cable is required. Only one cable is included with the IP Phone
1110 package. Connect one end of the PC Ethernet cable to your
phone using the CAT5 connector (PC Ethernet port), and thread it
through the channel. Connect the other end to the LAN connector
on the back of your PC.
CAUTION
Damage to Equipment
Do not plug any device into your IP Phone 1110 Ethernet
port other than one PC. The IP Phone 1110 does not
support multiple devices connected through the PC
Ethernet Port.
Complete steps 1 to 9, as needed, before wall-mounting the IP

Phone.

Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007