Nortel 1110 Fundamentals page 153

5
6
7
Timing information
When you see the text Nortel, you have 1 second to respond by pressing the
three soft keys at the bottom of the display in sequence from left to right, one
at a time. If you miss the 1-second response time, the IP Audio Conference
Phone 2033 attempts to locate the connect server. You can begin the power-up
sequence again, or you can double-press the Services key to open the network
diagnostic utilities to access the IP Phone settings. See
diagnostic utilities" (page
Copyright © 2003–2007, Nortel Networks
.
The IP Audio Conference Phone 2033 searches for the connect
server.
Enter the following information:
Screen prompt
Password
Node
TN
Select the Shift soft key labeled (>>) and press Clear to edit the
TN field. The IP Audio Conference Phone 2033 by default places
you in the units field of the TN. You can not use backspace to move
to the loop, shelf or card fields.
The IP Audio Conference Phone 2033 registers with the Terminal
Proxy Server (TPS) and, if needed, begins the firmware download.
This takes several minutes. When the download is complete, the IP
Audio Conference Phone 2033 resets.
The current system date and time appear on the top line of the
display when the configuration is complete. Self-labeling keys also
appear.
Check for a dial tone and the correct DN above the display.
(Optional) Customize the soft keys as required. For more information,
see Software Input Output Administration (NN43001-611) and IP
Phone Audio Conference Phone 2033 User Guide (NN43111-100).
483).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Installation and configuration 153
Description
IP Phone Installer Password.
You are not prompted to enter the IP Phone
Installer Password if it has not been configured
in your system.
The node ID.
The TN or VTN.
—End—
ATTENTION
Appendix "IP Phone