Copying Errors; Pc Printing Errors - Muratec MFX-1450 User Manual

Copying errors

Symptom
Cannot make a copy
Copy qualty s poor

PC printing errors *

Symptom
Cannot prnt from your
computer
Prntng s too slow
Prnt qualty s poor
The prntng opton does not
effect for the prntouts.
* In order to use your machne as a local or network prnter you should have the
applcable prnt drver nstalled from CD suppled wth your machne.
DA7-909H0-60.indb 27
Suggested solutions
• Make sure that the machne s n copy mode. If not, change to the copy mode
by pressng [COPY].
• Make sure that the document s loaded correctly.
If placng the document on the document glass, the sde to be coped should
be face down. If placng the document n the ADF, the sde to be coped should
be face up.
See "Prnt qualty problems," on page 11-29.
Suggested solutions
• The USB cable s not connected properly. (When usng as a local prnter)
Check the cable connecton.
• Check that the network cable s connected properly. (When usng as a net-
work prnter)
• Check that the network settng s made up properly.(When usng as a net-
work prnter)
• The port settng s ncorrect.
Check the prnter port settng n your computer.
• The applcable prnter drver may not be nstalled properly.
Renstall the prnter drver.
• Computer may not have enough memory.
Install more RAM n your computer.
• The prnt job s large or complex.
The machne takes a lot of tmes when prntng a large prnt jobs. Please wat
untl the machne finshes the job.
See "Prnt qualty problems," on page 11-29.
Some software applcatons wll overwrte the opton set on the prnter property page.
Choose your prntng optons from the applcaton.
t 11-27
rouBlEShooting
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
2007/04/26 20:15:15