Tcp/Ip SettNgs - Muratec MFX-1450 User Manual

Network settings
NOTE
You can also change the network settngs usng a web browser.
For detals, see Chapter 4, "Usng the Admn Tools," n the PC User's Guide.
TCP/IP settings
Ths machne uses TCP/IP protocol to communcate over the LAN, meanng the
TCP/IP settngs descrbed n ths secton must be regstered pror to usng the
machne on the LAN.
NOTE
Contact your network admnstrator f you are unsure about these settngs.
IMPORTANT
In order to actvate new settngs, the machne must be rebooted after new settngs
have been entered. Frst, shutdown the OfficeBrdge, then turn the machne OFF
and after three or more seconds, turn the machne back ON.
See "Turnng off the power," on page 1-18.
Opening the TCP/IP setting menu display
1
2
3
9-28 n
Etwork SEttingS
DA7-909H0-60.indb 28
Press <Settng> on the control panel.
Press [Management].
Press [Network Settngs].
2007/04/26 20:14:15