TransmSsOn ConfirmatOn Report - Muratec MFX-1450 User Manual

4
5
6
To change the transmission confirmation report setting temporarily:
If you want to temporarly change the transmsson confirmaton report settng, use
the followng procedure. After the transmsson has been completed the transms-
son confirmaton report settng wll return to the default settng.
1
2
3
4
5
4-22 u
SEFul tranSMiSSion FunctionS
DA7-909H0-60.indb 22
Select the settng you want, and then press [Enter].
[OFF] ....... Turn off the transmsson confirmaton report settng.
[Prnt] ....... Prnts the transmsson confirmaton report.
[e-mal] ..... Sends the transmsson confirmaton report to the specfied e-mal
address.
Enter an e-mal address, then press [Enter].
Press [Enter].
Press <Reset> to return to the standby mode..
After the transmsson has been completed, the machne prnts or sends the
transmsson confirmaton report accordng to your settng.
Press <FAX> to dsplay the Fax standby mode.
Press [Others], [Tx Report].
Press [Tx Report Settngs].
Select the settng you want.
Refer to the step 4 of "To actvate the transmsson confirmaton report".
Transmt a fax.
2007/04/26 20:13:28