Protection Passcode; Protect Passcode - Muratec MFX-1450 User Manual

Protection passcode

Your machne has a passcode protecton system that secures the securty features:

Protect passcode

When regsterng a protecton passcode, the followng features are secured by ths
passcode.
To set the passcode:
1
2
3
To change or delete the protect passcode, enter the four-dgt number already
regstered. Then enter a new four-dgt code to change the protect passcode, or enter
"0000" to delete the protect passcode. Then press [Enter].
4
NOTE
Wrte down the passcord, and keep t n a safe place.
9-88 P
rotEction PaSScodE
DA7-909H0-60.indb 88
• Securty recepton (page 5-58)
• PIN maskng (page 5-62)
• User Access/Cost Accountng protecton (page 8-14)
• Copy protecton (page 9-92)
• Server data prnt protecton (page 9-47)
Press <Settng> on the control panel.
Press [Management], [Next], then [Protect Passcode].
(1) Enter the four-dgt number.
(2) Press [Enter].
The passcode has been regstered.
Press <Reset> to return to the standby mode.
2007/04/26 20:14:30