Verifying The Ip Settings - Muratec MFX-1450 User Manual

Verifying the IP settings

You can png the IP address and verfy that t responds.
1
2
3
NOTE
If a network settngs code (see page 9-89) has been set, you must enter the proper
passcode usng the numerc keys and press [Enter].
4
5
6
DA7-909H0-60.indb 41
Press <Settng> on the control panel.
Press [Management].
Press [Network Settngs].
Press [Png].
Enter the IP address you want to verfy and then press [Execute].
If the IP address s actve on the network, you wll receve a reply.
If you do not receve a reply, refer to the "TCP/IP settng" to check the IP
address settngs.
Press <Reset> to return to the Standby mode.
n 9-41
Etwork SEttingS
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
2007/04/26 20:14:18