Subnet Mask - Muratec MFX-1450 User Manual

4
5
6

Subnet Mask

The subnet Mask specfies the IP address range of the subnet.
NOTE
If your server s DHCP complant, the subnet mask wll be assgned automatcally
and t cannot be edted. If the DHCP server s not nstalled on your network, you
can assgn a Subnet mask manually as descrbed below.
To assgn a Subnet mask manually:
1
2
3
4
DA7-909H0-60.indb 31
Enter the approprate IP address usng the numerc keys.
Press the arrow keys to navgate the IP address fields. To delete a number,
press the [Clear] button.
Press [Enter]. The dsplay returns to the TCP/IP settng menu.
You may configure addtonal settngs.
To return to the Standby mode, press <Reset>.
After you have regstered the network settngs please reboot the machne to
enable the new settngs. To reboot the machne, shutdown the OfficeBrdge
first, then turn the machne OFF and after three or more seconds, turn the
machne back ON. (See "Turnng off the power," page 1-18.)
Open the TCP/IP settng menu dsplay. (Refer to page 9-28.)
Press [DHCP Settng], then press [OFF] and [Enter].
Press [Subnet Mask].
Enter the approprate IP address of the subnet mask usng the numerc keys.
Press the arrow keys to navgate the IP address fields. Press the [Clear] to
delete a number.
n 9-31
Etwork SEttingS
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
2007/04/26 20:14:16