Netbios Name - Muratec MFX-1450 User Manual

NetBIOS name

Regster a NetBIOS name to dentfy your machne to other users on the network.
NOTE
• You can gve your machne a unque name contanng up to 15 characters. The
name cannot nclude symbols and/or blank spaces.
The name can nclude alphanumerc characters and the "–" symbol.
• The workgroup cannot contan duplcate NetBIOS names..
1
2
3
4
5
9-38 n
Etwork SEttingS
DA7-909H0-60.indb 38
Open the SMB settng menu dsplay. (Refer to page 9-36.)
Press [NetBIOS].
Enter a NetBIOS name. (Enter a name for your machne.)
Press [Enter]. The dsplay returns to the SMB settng menu.
You may configure addtonal settngs.
To return to the Standby mode, press <Reset>.
After you have regstered the network settngs please reboot the machne to
enable the new settngs. To reboot the machne, shutdown the OfficeBrdge
first, then turn the machne OFF and after three or more seconds, turn the
machne back ON. (See "Turnng off the power," page 1-18.)
2007/04/26 20:14:18