Setting The Paper Size - Muratec MFX-1450 User Manual

4
NOTE
You can also set the paper sze for bypass tray by pressng [Bypass] n the Copy
standby mode.

Setting the paper size

Default settng: 1st cassette: Letter, 2nd cassette (option): Letter, Bypass Tray: Letter
After loadng paper nto the paper cassette/bypass tray, you need to set the correct
paper sze on the control panel by usng the followng procedure.
1
2
Setting the paper type for the paper cassette

3
NOTE
[Cassette 2] appears only when the optonal second cassette has been nstalled on
the machne.
1-40 l
oading PaPEr
DA7-909H0-60.indb 40
After loadng paper nto the bypass tray, you need to set the correct paper sze.
(See "Settng the paper sze," below.)
Press <Settng> on the control panel.
Press [Paper Settngs].
Press [Cassette 1] or [Cassette 2].
2007/04/26 20:13:09