Cleaning The Adf Rollers; Cleaning The Drum Charge Wire And The Print Head - Muratec MFX-1450 User Manual

Cleaning the ADF rollers

If you are havng document feedng ssues, try ths procedure:
1
2
3

Cleaning the drum charge wire and the print head

When the followng message appears on the dsplay, or you are experencng poor
prnt qualty, the charge wre needs to be cleaned.
NOTE
Your machne wll prnt approxmately 100 pages after ths message appears,
after the maxmum number of prnts has been reached the machne wll dsplay
a "Prnter Not Usable" message and wll not allow any further prnt jobs to take
place. Ths wll prevent your machne from becomng permanently damaged.
DA7-909H0-60.indb 3
Turn off the power and dsconnect the power cable from the wall outlet.
Open the ADF cover.
Use a cloth mostened wth a rubber roller cleaner to clean the face of the roll-
ers.
Rotate the rollers by hand to clean the entre roller surface.
M 11-3
aintEnancE
2007/04/26
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
20:14:37