Setting The Protect Passcode - Muratec MFX-2570 Administrator's Manual

6
Enter the new password again, and press [Enter].

Setting the Protect Passcode

You can set a four digit number of your choice for the protect passcode. Make sure to
make a note of and store the number after setting it.
„ Setting the Protect Passcode
1
Press <Setting>.
2
Press [Management].
3
If an administrator password is set, enter the password and press [Enter].
If an administrator password is not set, proceed to step 4.
4
Press [Protect Passcode].
Setting Security Codes
1
2
2-7