Setting The Protect Passcode - Muratec MFX-2590 Administrator's Manual

Setting the Protect Passcode

You can set a four digit number of your choice for the protect passcode. Make sure to
make a note of and store the number after setting it.
„ Setting the Protect Passcode
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set,
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [Protect Passcode].
6
Enter the protect passcode using the numeric keys, and press [Enter].
Enter a four digit number.
Note
Make sure to make a note of and store the protect passcode you set so that you do not
forget it. It is also necessary to enter the protect passcode when disabling it.
press [Admin Password].
Setting Security Codes
1
2
2-7