Netbios Name - Muratec MFX-1430 Network Manual

NetBIOS name

Register a NetBIOS name to identify your machine to other users on the network.
NOTE: • You can give your machine a unique name containing up to 15 characters. The
name cannot include symbols and/or blank spaces.
The name can include alphanumeric characters and the "–" symbol.
• The workgroup cannot contain duplicate NetBIOS names..
1
Open the SMB setting menu display. (Refer to page 2-10.)
2
Press [NetBIOS].
3
Enter a NetBIOS name. (Enter a name for your machine.)
4
Press [Enter]. The display returns to the SMB setting menu.
You may configure additional settings.
To return to the Standby mode, press [Reset].
5
After you have completed registering the network settings, the machine
should be rebooted to enable the new settings. To reboot the machine, turn the
machine "Off" and after three or more seconds, turn the machine back "On"
2-12 Network settings