Subnet Mask - Muratec MFX-1450 Software Manual

Subnet Mask

The Subnet Mask specifies the IP address range of the subnet.
NOTE
If your server is DHCP compliant, the subnet mask will be assigned automatically
and it cannot be edited. If the DHCP server is not installed on your network, you
can assign a Subnet mask manually as described below.
To assign a Subnet mask manually:
1
2
3
4
5
6
PC_Users_Guide.indb 9
Open the TCP/IP setting menu display. (see page 1-5)
Press [DHCP Setting], then press [OFF] and [Enter].
Press [Subnet Mask].
Enter the appropriate IP address of the subnet mask using the numeric keys.
Press the arrow keys to navigate the IP address fields. Press the [Clear] to
delete a number.
Press [Enter]. The display returns to the TCP/IP setting menu.
You may configure additional settings.
To return to the Standby mode, press [Reset].
After you have registered the network settings, please reboot the machine. To
reboot the machine, press [OB Shutdown] and turn the machine "Off" and after
three or more seconds, turn the machine back "On".
tcP/iP 1-9
SettinGS
2007/04/27
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
10:17:40