Terminal Configuration; Wiring Procedure - Omron V1000 User Manual

3.7 Control Circuit Wiring
u

Terminal Configuration

n
Wire Size
Select the appropriate wires and crimp terminals from
simplicity and reliability.
Terminal
Applicable wire size
S1-S6, SC, RP, +V, A1, Stranded wire:
A2, AC, HC, H1, H2, P1, 0.2 to 1.0
P2, PC, MP, AM, AC, S (24 to 16)
+, S-, R+, R-, IG, MA, Solid wire: 0.2 to 1.5
MB, MC (24 to 16)
n Ferrule-Type Wire Terminations
Crimp a ferrule to signal wiring to improve wiring simplicity and reliability. Use CRIMPFOX ZA-3, a crimping tool
manufactured by PHOENIX CONTACT.
2
Size mm (AWG)
0.25 (24)
0.34 (22)
0.5 (20)
u

Wiring Procedure

This section describes the proper procedures and preparations for wiring the control terminals.
WARNING! Electrical Shock Hazard. Do not remove covers or touch the circuit boards while the power is on. Failure to comply could
result in death or serious injury.
NOTICE: Separate control circuit wiring from main circuit wiring (terminals R/L1, S/L2, T/L3, B1, B2, U/T1, V/T2, W/T3, -, +1, +2) and
other high-power lines. Improper wiring practices could result in drive malfunction due to electrical interference.
NOTICE: Separate wiring for digital output terminals MA, MB and MC from wiring to other control circuit lines. Improper wiring practices
could result in drive or equipment malfunction or nuisance trips.
NOTICE: Use a class 2 power supply (UL standard) when connecting to the control terminals. Improper application of peripheral devices
could result in drive performance degradation due to improper power supply.
52
Figure 3.16 Removable Control Circuit Terminal Block
Table 3.9 Wire Size Specifications (Same for All Models)
Bare Wire Terminal
Recomm. mm
mm 2 (AWG) (AWG)
0.75 (18)
Figure 3.17 Ferrule Dimensions
Table 3.10 Ferrule Terminal Types and Sizes
Type L (mm)
AI 0.25-8YE 12.5
AI 0.34-8TQ 10.5
AI 0.5-8WH or
14
AI 0.5–8OG
Table 3.9. Crimp a ferrule to signal wiring to improve wiring
Applicable wire size
2
mm 2
(AWG)
0.25 to 0.5
(24 to 20)
d1
d2
d1 (mm) d2 (mm)
0.8 1.8
0.8 1.8
1.1 2.5
SIEP C710606 20 OYMC AC Drive - V1000 User Manual
Ferrule-Type Terminal
Recomm. mm 2
(AWG)
0.5 (20) Shielded line, etc.
Manufacturer
PHOENIX CONTACT
Wire Type