SECTION 1
Product Outline
System Configuration
V640-HAM11-ETN
Host device
V640-HAM11-L-ETN
Host device
If the IP address is set on the DIP switch, it will be in the form 192.168.1.@@@. The subnet mask is always 255.255.255.0
The IP address of the Amplifier Unit can be either set on this DIP switch or the desired IP address can be set in ROM. If pins 1 to
5 on the DIP switch are all turned OFF, the IP address that is set in ROM will be used.
CIDRW System
18
User's Manual
Ethernet hub
Recommended: W4S1-05B(OMRON)
LAN cable
LAN cable
Ethernet hub
Recommended: W4S1-05B(OMRON)
LAN cable
LAN cable
Amplifier Unit
V640-HAM11-ETN
Amplifier Unit
V640-HAM11-L-ETN
CIDRW Head
V640-HS61
CIDRW Head
V640-HS62