Section Safety; Section Safety - Omron V1000 User Manual
Compact vector control drive 200 v class three-phase input 0.1 to 15 kw, 200 v class single-phase input 0.1 to 4.0 kw, 400 v class three-phase input 0.2 to 15 kw
Hide thumbs
Also See for V1000:
- Quick start manual (32 pages) ,
- Product information (19 pages) ,
- Manual (25 pages)
Table of Contents
Advertisement
1.1 Section Safety
1.1
Section Safety
Do not carry the drive by the front cover.
Failure to comply may cause the main body of the drive to fall, resulting in minor or moderate injury.
Observe proper electrostatic discharge procedures (ESD) when handling the drive and circuit boards.
Failure to comply may result in ESD damage to the drive circuitry.
A motor connected to a PWM drive may operate at a higher temperature than a utility-fed motor and the operating
speed range may reduce motor cooling capacity.
Ensure that the motor is suitable for drive duty and/or the motor service factor is adequate to accommodate the additional
heating with the intended operating conditions.
18
CAUTION
NOTICE
SIEP C710606 20 OYMC AC Drive - V1000 User Manual
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
