Removing And Attaching The Protective Covers; Exterior And Mounting Dimensions - Omron V1000 User Manual

2.2 Mechanical Installation
NOTICE: When drives with IP20/NEMA Type 1 enclosures are mounted side by side, the top covers of all drives must be removed as
shown in Figure 2.4.
u

Removing and Attaching the Protective Covers

Refer to Electrical Installation on page
u

Exterior and Mounting Dimensions

Protective Design
IP20/Open-Chassis
Without an EMC Filter
IP20/Open-Chassis
With an EMC Filter
IP20/NEMA Type 1
Without an EMC Filter
Note: Refer to Specifications on page 287
32
Figure 2.4 IP20/NEMA 1 Side-by-Side Mounting in Enclosure
37, for information regarding the removal and reattachment of protective covers.
Table 2.2 Drive Models and Types
Single-Phase
200 V Class
B0P1B
B0P2B
B0P4B
B0P7B
B1P5B
B2P2B
B4P0B
B0P1E
B0P2E
B0P4E
B0P7E
B1P5E
B2P2E
–
for information on the amount of heat generated by the drive and appropriate cooling methods.
Drive Model VZA
Three-Phase
200 V Class
20P1B
20P2B
20P4B
20P7B
21P5B
22P2B
24P0B
–
–
25P5F
27P5F
2011F
2015F
SIEP C710606 20 OYMC AC Drive - V1000 User Manual
Page
Three-Phase
400 V Class
– 33
40P2B
40P4B
40P7B
41P5B 33
42P2B
43P0B
44P0B
– 34
40P2E
40P4E
40P7E
41P5E 34
42P2E
43P0E
44P0E
45P5F
47P5F
35
4011F
4015F