Memobus/Modbus Termination; Memobus/Modbus Termination - Omron V1000 User Manual
Compact vector control drive 200 v class three-phase input 0.1 to 15 kw, 200 v class single-phase input 0.1 to 4.0 kw, 400 v class three-phase input 0.2 to 15 kw
Hide thumbs
Also See for V1000:
- Quick start manual (32 pages) ,
- Product information (19 pages) ,
- Manual (25 pages)
Table of Contents
Advertisement
3.10 MEMOBUS/Modbus Termination
3.10 MEMOBUS/Modbus Termination
DIP switch S2 controls the terminal resistance as shown in . The OFF position is the default of the terminating resistor
switch for MEMOBUS/Modbus communications. Turn the terminal resistor switch ON when the drive is the last drive in
a series of slave drives.
Table 3.15 MEMOBUS/Modbus Switch Settings
S2 Position
Description
ON
Internal terminal resistance ON
OFF
Internal terminal resistance OFF (no terminal resistance); default setting
DIP Switch S2
OFF
ON
Figure 3.26 DIP Switch S2
Note: Refer to the MEMOBUS/Modbus communications manual for details on MEMOBUS/Modbus.
58
SIEP C710606 20 OYMC AC Drive - V1000 User Manual
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
