Connecting An Option Card; Connecting An Option Card; Verifying The Option Card And Product Type; Connecting The Option Card - Omron V1000 User Manual
Compact vector control drive 200 v class three-phase input 0.1 to 15 kw, 200 v class single-phase input 0.1 to 4.0 kw, 400 v class three-phase input 0.2 to 15 kw
Hide thumbs
Also See for V1000:
- Quick start manual (32 pages) ,
- Product information (19 pages) ,
- Manual (25 pages)
Table of Contents
Advertisement
8.6 Connecting an Option Card
8.6
Connecting an Option Card
The drive can communicate with other devices through a specially designed option card. The following section describes
how to install an option card.
Refer to option card manual for detailed installation instructions.
Note:
Refer to Available Communication Options on page 283
u
Verifying the Option Card and Product Type
A – Option card
B – Option card cover installation screw holes
C – Tabs for mounting front cover
D – Comm. connector (CN1)
E – Ground lead connection
u
Connecting the Option Card
1.
Loosen the screw on the front cover of the drive to remove the cover.
2.
Remove the terminal cover. Connect the lead from the option card to the drive ground terminal.
A – Ground terminal
B – Ground lead
3.
Reattach the terminal cover.
4.
Attach the option card to the drive.
284
for a list of option cards for use with this product.
A
B
C
D
E
F
F – Wire through-hole
G – Option card cover
H – Cover screw
I –
Ground lead
Figure 8.11 Option Card
Figure 8.12 Remove Cover
A
B
C
C – Terminal cover
Figure 8.13 Connect Lead
G
H
I
SIEP C710606 20 OYMC AC Drive - V1000 User Manual
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
