Calibration Mode - Omron e5ck User Manual

CHAPTER 5 PARAMETERS

Calibration Mode

• The parameters in this mode can be used only when the security" parameter (pro
tect mode) is set to 0". When selecting this mode for the first time after the E5AK T
has left the factory, return the security" parameter to 0".
• This mode contains the parameters for user calibration of inputs and outputs. Only
parameters relating to input types specified in the input type" parameter (setup
mode) can be used. Also, related output parameters can be used only when the com
munications unit (E53 CKF) is addedon.
• To select this mode, press the
to the menu display. If you select [
the
• For details on parameters in the calibration mode, see Chapter 7 Calibration.
5–48
key for 1 second minimum, the controller enters the calibration mode.
key for 1 second minimum. The display changes
] using the and keys, and then press