Setting Level Configuration And Key Operations - Omron E5AN-H User Manual

Digital controllers
Hide thumbs Also See for E5AN-H:
Table of Contents

Advertisement

Setting Level Configuration and Key Operations

1-3
Setting Level Configuration and Key Operations
Start in manual mode.
Start in automatic mode.
a-m
Press the O Key
for at least 3 s while
a-m is displayed.
(a-m will flash after
Manual
1st second.)
mode
Press the PF Key
for at least 1 s.
Manual
Control Level
Control stops.
Parameters are divided into groups, each called a level. Each of the set val-
ues (setting items) in these levels is called a parameter. The parameters on
the E5CN/AN/EN-H are divided into the following 9 levels.
When the power is turned ON, all of the display lights for approximately one
second.
Power ON
Operation
Level
Press the
O Key less than 1 s.
PID Setting
Level
Press the O Key
for at least 1 s.
Initial Setting
Level
Press the O Key
for at least 1 s.
Advanced Function
Setting Level
Calibration Level
Note
(1) Your can return to the operation level by executing a software reset.
(2) You cannot move to other levels by operating the keys on the front panel
from the calibration level. You must turn OFF the power supply.
(3) From the manual control level, key operations can be used to move to the
operation level only.
Protect level
Operation level
Adjustment level
Bank setting level
Adjustment
Level
Press the
O Key less than 1 s.
Press the
O Key less
than 1 s.
Bank Setting
Level
Press the
O Key less
than 1 s.
Monitor/Setting
Item Level
Press the O Key for at
least 3 s. (Display will flash
25.0
after 1st second.)
c
100.0
Communica-
tions Setting
Level
Press the
O Key for less than 1 s.
Input password.
Level
Control in progress
Can be set.
Can be set.
Can be set.
Can be set.
Section 1-3
Press
the O +
M Keys
25.0
c
for at
least 3 s.
100.0
(Display
will flash
after 1st
second.)
Protect Level
Note: The time taken to
move to the protect
level can be adjusted
by changing the
"Move to protect level
time" setting.
Control in progress
Control stopped
Not displayed for some models
Level change
Control stopped
---
---
---
---
Press the O+
M Keys for at
least 1 s.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E5cn-hE5en-h

Table of Contents