Omron E5AN-H User Manual page 174

Displaying PV/SV Status
Note
SV Status Display
Function
Note
Note
Set value
Alarm 3
Alarm 1 to 3 OR status
Heater Alarm (See note.)
• The default is OFF.
"HA" can be selected for models that do not support heater burnout detection,
but the function will be disabled.
Example: When STOP Is Selected for the PV Status Display Function
Normal
C
25.0
PV/SP
100.0
The SP, Blank, or Manual MV in the PV/SP, PV, or PV/Manual MV Display
(Valve Opening) and the control and alarm status specified for the SV status
display function are alternately displayed in 0.5-s cycles.
Set value
OFF
Manual
Stop
Alarm 1
Alarm 2
Alarm 3
Alarm 1 to 3 OR status
Heater Alarm (See note.)
• The default is OFF.
"HA" can be selected for models that do not support heater burnout detection,
but the function will be disabled.
Example: When ALM1 Is Selected for the SV Status Display Function
When ALM1 Is ON
Normal
C
25.0
PV/SP
100.0
The order of priority for flashing and alternating displays on the No. 2 display
are as follows:
Symbol
alm3
ALM3 is alternately displayed during
Alarm 3 status.
alm
ALM is alternately displayed when Alarm
1, 2, or 3 is set to ON.
ha
HA is alternately displayed when a heater
burnout alarm, HS alarm, or heater over-
current alarm is ON.
When RUN/STOP
is STOP
C
stop
100.0
Symbol
off
No SV status display
manu
MANU is alternately displayed during
manual control.
stop
STOP is alternately displayed while oper-
ation is stopped.
alm1
ALM1 is alternately displayed during
Alarm 1 status.
alm2
ALM2 is alternately displayed during
Alarm 2 status.
alm3
ALM3 is alternately displayed during
Alarm 3 status.
alm
ALM is alternately displayed when Alarm
1, 2, or 3 is set to ON.
ha
HA is alternately displayed when a heater
burnout alarm, HS alarm, or heater over-
current alarm is ON.
C
25.0
Alternating
display
alm1 100.0
Section 4-22
Function
Alternating
display
25.0
Function
153