Omron E5AN-H User Manual page 170

Setting the PF Key
Set
value
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Note
Note
Operating Procedure
Operation Level
PV/SP
C
25.0
100.0
Initial Setting Level
Input Type
in-t
5
Setting
Disabled
PV/SP/Bank No. (See note 1.)
PV/SP/MV (See notes 1 and 2.)
PV/SP /Soak time remain (See note 1.) Can be set. (SP)
Proportional band (P) (See note 3.)
Integral time (I) (See note 3.)
Derivative time (D) (See note 3.)
Alarm value 1 (See note 4.)
Alarm value upper limit 1 (See note 4.) Can be set.
Alarm value lower limit 1 (See note 4.)
Alarm value 2 (See note 4.)
Alarm value upper limit 2 (See note 4.) Can be set.
Alarm value lower limit 2 (See note 4.)
Alarm value 3 (See note 4.)
Alarm value upper limit 3 (See note 4.) Can be set.
Alarm value lower limit 3 (See note 4.)
Bank No.
(1) The SP for the current bank will be displayed.
(2) For details on MV settings for heating and cooling control, refer to MV
Display for Heating and Cooling Control on page 82.
(3) The set value for the current PID set will be displayed.
(4) The set value for the current bank will be displayed.
Setting Monitor/Setting Items
Pressing the PF Key in the operation, adjustment, bank setting, or PID setting
level displays the applicable monitor/setting items. Press the PF Key to dis-
play in order Monitor/Setting Items 1 to 5. After Monitor/Setting Item 5 has
been displayed, the display will switch to the top parameter in the operation
level.
(1) Items set as disabled in the Monitor/Setting Items 1 to 5 parameters will
not be displayed, and the display will skip to the next enabled setting.
(2) While a monitor/setting item is being displayed, the display will be
switched to the top parameter in the operation level if the M Key or the
O Key is pressed.
This procedure sets the PF Setting parameter to PFDP, and the Monitor/Set-
ting Item 1 parameter to 7 (Alarm Value 1).
1. Press the O Key for at least three seconds to move from the operation
level to the initial setting level.
Remarks
Monitor/Setting
Can be set. (SP)
Can be set. (SP)
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Section 4-20
Symbol
---
---
---
---
p
i
d
al-1
al1h
al1l
al-2
al2h
al2l
al-3
al3h
al3l
bank
149