Setting Level Configuration And Key Operations - Omron E5CN User Manual

Setting Level Configuration and Key Operations

1-3 Setting Level Configuration and Key Operations
Started in manual mode.
Press the O Key
for at least 1 s.
C
a-m
Press the O Key
for at least 1 s;
(See
display will flash.
note
Press the O Key
Manual
for at least 3 s while
3.)
mode
a-m is displayed.
Manual Control
Level
Note
10
Parameters are divided into groups, each called a "level." Each of the set val-
ues (setting items) in these levels is called a "parameter." The parameters on
the E5CN/CN-U/AN/EN are divided into the following eight levels.
When the power is turned ON, all of the display lights for approximately one
second.
Power ON
Started in automatic mode.
Operation Level
Press the
O Key less than 1 s.
Press the
O Key for
(See
at least 1 s.
note 1.)
Initial Setting Level
Press the O Key
for at least 1 s.
Advanced Function
Setting Level
Calibration Level
(1) Operation level entered for software reset.
(2) You cannot move to other levels by operating the keys on the front panel
from the calibration level. You must turn OFF the power supply.
(3) From the manual control level, key operations can be used to move to the
operation level only.
Level
Protect level
Operation level
Adjustment level
Manual control level
Initial setting level
Advanced function setting level
Calibration level
Communications setting level
Adjustment Level
Press the O+
M Keys for at
least 1 s.
Press the O Key for at
C
25
least 1 s; display will flash.
Press the O Key for at
100
least 3 s.
Control stops.
Communi-
cations Set-
ting Level
Press the
O Key for less than 1 s.
Input password.
Set value 169
Input password.
Set value 1201
(See
note 2.)
Control in progress
Can be set.
Can be set.
Can be set.
Can be set.
---
---
---
---
Section 1-3
Press the O +
M keys; display
will flash.
C
25
100
Press the O +
M Keys for at
least 3 s. (See
note.)
Protect level
Note: The time taken to move
to the protect level can
be adjusted by chang-
ing the "Move to pro-
tect level time" setting.
Control in progress
Control stopped
Not displayed for some models
Level change
Control stopped
---
---
---
---
Can be set.
Can be set.
Can be set.
Can be set.