Setting Level Configuration And Key Operations - Omron E5CZ User Manual

Setting Level Configuration and Key Operations

1-3 Setting Level Configuration and Key Operations
Started in manual mode.
Press the O Key
for at least 1 s.
a-m
C
Press the O Key
for at least 1 s;
(See
display will flash.
note
Press the O Key
Manual
for at least 3 s while
3.)
mode
a-m is displayed.
Manual Control
Level
10
Parameters are divided into groups, each called a "level." Each of the set val-
ues (setting items) in these levels is called a "parameter." The parameters on
the E5CZ/CZ-U/AZ/EZ are divided into the following seven levels.
When the power is turned ON, all of the display lights for approximately 1 sec-
ond.
Power ON
Started in automatic mode.
Operation Level
Press the
O Key for
(See
at least 1 s.
note 1.)
Initial Setting Level
Press the O Key
for at least 1 s.
Advanced Function
Setting Level
Note (1) Operation level entered for software reset.
(2) From the manual control level, key operations can be used to move to the
operation level only.
Protect level
Operation level
Adjustment level
Manual control level
Initial setting level
Advanced function setting level ---
Communications setting level
Of these levels, the initial setting level, communications setting level,
and advanced function setting level can be used only when control is
stopped. Control outputs are stopped when any of these three levels
is selected.
Adjustment Level
Press the
O Key less than 1 s.
Press the O Key for at
25
C
least 1 s; display will flash.
Press the O Key for at
100
least 3 s.
Control stops.
Communica-
tions Setting
Level
Press the
O Key for less than 1 s.
Input password.
Set value −169
Level Control in progress
Can be set.
Can be set.
Can be set.
Can be set.
---
---
Section 1-3
Press the O +
M keys; display
will flash.
Press the O+
M Keys for at
25
C
least 1 s.
100
Press the O +
M Keys for at
least 3 s. (See
note.)
Protect level
Note: The time taken to move
to the protect level can
be adjusted by
changing the "Move to
protect level time"
setting.
Control in progress
Control stopped
Not displayed for some models
Level change
Control stopped
---
---
---
---
Can be set.
Can be set.
Can be set.