Monitor/Setting Item Level - Omron E5AN-H User Manual

Monitor/Setting Item Level

5-7

Monitor/Setting Item Level

Monitor/Setting Item Display 1 to 5
Function
See
See
220
Monitor/setting items can be displayed by means of the function key when the
PF Setting parameter (advanced function setting level) is set to PFDP: Moni-
tor/Setting Item (for the E5AN/EN-H only).
PF Key
Monitor/Setting
Item Level
PF
Key
• When the PF Key is set to display monitor/setting items, pressing the PF
Key will display in order the contents of the Monitor/Setting Item 1 to 5
parameters. The contents of these parameters are shown in the following
table. For the setting (monitor) ranges, refer to the applicable parameters.
Set
value
0 Disabled
1 PV/SP/Bank No.
2 PV/SP/MV
3 PV/SP /Soak time remain
4 Proportional band (P)
5 Integral time (I)
6 Derivative time (D)
7 Alarm value 1
8 Alarm value upper limit 1
9 Alarm value lower limit 1
10 Alarm value 2
11 Alarm value upper limit 2
12 Alarm value lower limit 2
13 Alarm value 3
14 Alarm value upper limit 3
15 Alarm value lower limit 3
16 Bank No.
■ Related Parameters
PF setting (advanced function setting level): Page 273
Monitor/setting items 1 to 5 (advanced function setting level): Page 274
Power ON
Operation Adjustment
Level Level
Press the O Key for
at least 1 s.
Bank Setting
PID Setting
Level Level
The PF Setting parameter must be
set to PFDP, and the Monitor/Setting
Item 1 to 5 parameters must not be
set to OFF.
Setting
Monitor/Setting
Can be set. (SP)
Can be set. (SP)
Can be set. (SP)
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Section 5-7
Control in progress
Remarks
Symbol
---
---
---
---
p
i
d
al-1
al1h
al1l
al-2
al2h
al2l
al-3
al3h
al3l
bank