Omron CQM1H - PROGRAM Programming Manual page 482

Host Link Commands
Note
6-5-19 SV READ 3 –– R%
Command Format
1 0
@ x 10 x 10 R
Node No. Header
code
Response Format
1 0
@ x 10 x 10
Node No. Header
code
Operand, SV (Response)
The name that indicates the SV classification is returned to "Operand," and
either the word address where the SV is stored or the constant SV is returned
to "SV."
Operand
OP1 OP2
C I O
L R (Space) (Space) LR
H R (Space) (Space) HR
A R (Space) (Space) AR
D M (Space) (Space) DM
*
D M
E M (Space) (Space) EM
E M *
C O N
1. The instruction name and operand area designations must be in four char-
acters. Fill any gaps with spaces to make a total of four characters.
2. Only the CQM1H-CPU61 CPU Unit has an EM area.
Reads the constant SV or the word address where the SV is stored. The SV
that is read is a 4-digit decimal number (BCD) written in the second word of
the TIM, TIMH(15), TTIM, CNT, or CNTR(12) instruction at the specified pro-
gram address in the user's program. With this command, program addresses
can be specified for a program of up to 99,999 steps.
5 4 3
% x 10 x 10 x 10 x 10
Program address
(00000 to 99999)
Must be "0"
An end code of 00 indicates normal completion.
1 0
R % x 16 x 16 OP1 OP2 OP3 OP4
End code
Classification
OP3 OP4
(Space) IR or SR
(Space) DM (indirect)
(Space) EM (indirect)
(Space) Constant
2 1 0
x 10 x 10 OP1 OP2 OP3
Name
3
x 10 x 10
Operand SV
Section 6-5
Constant or word address
0000 to 0255
0000 to 0063
0000 to 0099
0000 to 0027
0000 to 6655
0000 to 6655
0000 to 6143
0000 to 6143
0000 to 9999
3 2 1
OP4 x 10 x 10 x 10 x 10
Timer/counter
(0000 to 0511)
*
FCS Terminator
*
2 1 0
x 10 x 10
FCS Terminator
0
↵
↵
457