Deliver Command: Cmnd - Omron CQM1H - PROGRAM Programming Manual

Network Instructions
00000 AR 0209
C: DM 0300
C+1: DM 0301
C+2: DM 0302
C+3: DM 0303
Flags
5-29-3 DELIVER COMMAND: CMND(––)
Limitations
Description
412
15 0
0 0 0 A
C 3 6 4
0 0 0 3
0 0 0 0
ER: Indirectly addressed EM/DM word is non-existent.
(Content of *EM/*DM word is not BCD, or the EM/DM area boundary
has been exceeded.)
The number of send words exceeds 990 words for a Controller Link
Unit.
There is no Controller Link Unit installed.
The received data exceeds the data area boundary.
Ladder Symbols
CMND(−−)
S
D
C
C through C+5 must be within the same data area and must be within the val-
ues specified below. To be able to use CMND(––), the system must have a
Controller Link Unit mounted.
When the execution condition is OFF, CMND(––) is not executed. When the
execution condition is ON, CMND(––) transmits the FINS command beginning
at word S to the specified node on the Controller Link System and receives
the response.
Address Instruction
@RECV(98)
00000
DM 0100
00001
DM 0200
00002
DM 0300
Node 3
DM 0100
DM 0101
DM 0109
@CMND(−−)
IR, SR, AR, DM, EM, HR, TIM/CNT, LR
S
D
IR, SR, AR, DM, EM, HR, TIM/CNT, LR
C
IR, SR, AR, DM, EM, HR, TIM/CNT, LR
Section 5-29
Operands
LD
AND AR
RECV(98)
DM
DM
DM
DM 0200
DM 0201
DM 0209
Operand Data Areas
S: First command word
D: First response word
C: First control word
00000
0209
0100
0200
0300